Q: Does BATS seal a puncture in the tread of a tyre? A: Yes, BATS is designed to seal punctures in the tread area of a tyre. It works by forming a secure seal around the puncture to help maintain air pressure and extend the tyre's usability. However, the effectiveness may depend on the size and location of the puncture. Always check the product instructions for specific limitations and recommendations. Q: Does a nail or other protruding object in the tyre need to be removed even though BATS prevents a flat tyre? A: Yes, it is recommended to remove the nail or other object from the tyre. While BATS helps prevent a flat by sealing the puncture, leaving the object in place can cause further damage to the tyre over time. Once removed, the BATS sealant will work to fill and seal the hole properly. Always inspect the tyre and follow manufacturer guidelines for safety and longevity. Q: How should I remove a screw or other object from the tyre when using BATS? A: If the object is a screw, it should be unscrewed rather than pulled out forcefully, as yanking it may cause the tyre to tear. It is also important to drive the vehicle immediately after removing the puncturing object. The rotation of the tyre and centrifugal force will help distribute the BATS liquid into the hole, allowing it to perform an instantaneous repair. Always check the tyre after sealing to ensure proper inflation and safety. Q: Can BATS be used on tyres with inner tubes? A: Yes, however, inner tubes are more prone to tearing when punctured, and the sealant may not create a lasting repair due to the movement of the tube inside the tyre. For inner-tube tyres, it is recommended to use a product specifically designed for them or replace the tube if damaged. WQ: Is BATS affected by extreme temperatures? A: BATS is formulated to withstand a wide range of temperatures and remain effective in both hot and cold conditions. fQ: Does BATS create a hard plug in the tread area of the tyre? A: No, BATS does not create a hard plug. Instead, it remains flexible and forms a durable seal within the puncture, allowing the tyre to maintain proper air pressure while preserving its natural flexibility. This ensures that the tyre continues to perform as intended without causing imbalances or stiffness in the tread area. Q: Does BATS have an expiry date? A: No, the shelf life of BATS is practically indefinite as long as the container is closed. Q: Does BATS react chemically with the rubber tyre? A: No, BATS does not react chemically with the rubber of the tyre. It is formulated to be non-corrosive and safe for use with all standard tyre materials. BATS works by forming a physical seal within the puncture without degrading or weakening the rubber structure. This ensures that the tyre maintains its integrity and longevity.